yo,
Also:
Assuming you have the E4OD;
if so, It does not have a modulator
&
ck:
tranny pan for bad seal
Extension housing seal and bushing area
May be the seal or gasket between the front pump and the case, or you may have a bad drive tube on the converter that is damaging the seal. Check the surface of the converter tube that rotates inside the seal for nicks or burrs
From bellhousing:
Running leaks in front of pump = Pump seals, o-ring, or bolts
Slinging around bellhousing = Converter may be cracked (not llikely & hope not!)
After wiping down the tranny, I use baby powder to isolate leak area; hopefully you will be able to see the problem area.