C-6 leaking and heater core r&i with under dash A/C

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gatormac

New member
Joined
Jan 3, 2008
Messages
1
Reaction score
0
Location
85374
my trans is leaking from the front of the bell housing pooling under the flywheel. any Suggestions would be great. I am also trying to R2 my heater core, however my under dash a/c unit is in the way. is there anyway to R2 the core without removing the a/c unit?

 
Last edited by a moderator:

cowboydan

New member
Joined
Jun 11, 2004
Messages
185
Reaction score
0
tranny seems to have blown a front seal, not much $$$ but you do need to atleast pull the tranny back. not sure of your a/c as i have always had an 87 body and my a/c wasn't in the way of my heatercore

 

Broncobill78

New member
Joined
Oct 11, 2007
Messages
1,867
Reaction score
7
Location
Treasure Coast, Florida
Ditto on the front tranny seal. It's a bitch to get to since you have to pull the tranny. Once you've gone thru that much hassle I'd advise having a shop take a quick look at it and maybe do a quick rehab since there don't seem to be any major problems with it *yet*. having someone look at it now while it's out can save you a world of hassles a year or two down the road if you have to take it down again. The C6 is a good sturdy tranny and having it looked at now would be what I'd do.

For heater core info take a look at the info I posted a while back: http://broncozone.com/forums/index.php?showtopic=12588 Everything that you need to know is right there.

 
Last edited by a moderator:

Members online

No members online now.

Forum statistics

Threads
22,631
Messages
136,786
Members
25,317
Latest member
drubbz
Top