Bearing nut

[DLR]

Hi all! Wanting to check, repack front bearing one side has little play. In photo I had laid out parts as I removed them. Also a photo of bearing nut. That will nut loosen. In picture is that a washer with the holes? Won't come out seem part of nut? Why you think the scratch markings all about? Thanks, really do appreciate yall's replying back thanks again!

 

[DLR]

Still working on trying to remove washer and nut. I guess the washer is recessed into the nut? Maybe the markings are someone had tried to remove it before? Any input will be appreciated thanks

 

[DLR]

Ok found this picture. So this is what I have with this Bronco? Picture must be the back of nut?

 

[Tiha]

Ok found this picture. So this is what I have with this Bronco? Picture must be the back of nut?

If it is, someone put the nut in backwards. Let me see if I can find a picture of the "keeper" I don't see it in your picture of parts up there.

 

[Tiha]

You need to remove this keeper or retaining key. It is the one next to the nut in the RH picture, bottom but is what you have