74 bronco c4 to c6 swap will it work with dana 20?

[vmulisano]

i have a 74 302 bronco with a dead C4, i wanted to put in a C6 but was curious if anybody has done it and will the model 20 transfer case bolt up? thanks!

new to this forum but not new to wheeling and other forums, had lifted bII with 4.0L swap on 33's but sold it for this EB.

 

[89Bronco58]

as far as i have ever known all ford transfer cases have the same bolt patterns, so it should work, not 100% sure tho, check with a manual

 

[vmulisano]

as far as i have ever known all ford transfer cases have the same bolt patterns, so it should work, not 100% sure tho, check with a manual

ok, so not to be rude but that wasnt helpful....has anybody done this swap?

 

[ricks73eb]

no your guna need an adapter most the bronco guys have um jeffs, james and the like.. i guess they only make the driveline about 2 or 3 inches longer.. hope this helps

 

[89Bronco58]

one of the questions that you asked was if the transfer case would work, so i added my input, i wasnt going to answer to the rest because i was unsure, so i helped with what i could