rising rust floor pans

dtwood456 · Feb 20, 2006

Working on the dash now. Sanded it down to the old and am test fitting it. Still have to take it off and do a lot more. Including the brake pedal assembly, etc.

New Pics here

I started on the drivers side. Boy, the more I cut, the more rust I found. that is alright though. I have most of the floor pan in now. You can look at the progress on My Bronco Project

I will keep you all updated on the progress..

David

dtwood456 · Feb 23, 2006

I added a few pics

cometbrown · Feb 24, 2006

Looks excellent! I am probably going to be in the same situation in a few weeks. Do you think you came out ahead by fabricating your own floor boards. I am not as adept at welding as you appear to be, and am wondering if, with all the mistakes I am bound to make, it would be the right decision to fabricate my own as well. I really enjoy the pics you have put up of your overhaul. Good luck.

cometbrown

dtwood456 · Feb 24, 2006

Looks excellent!

dtwood456 · Feb 27, 2006

I just added the rest of the floor pan pics. I have them all tacked, but now it is time to start welding it all up.

dtwood456 · Feb 28, 2006

I am working on the dash panel now. I sanded it down to the old paint and metal. I am not sure what I will do for replacement knobs as so forth. I am going to have to make a bracket for the steering colum to attatch to. I have a dash pad for it that is in pretty good shape.

cometbrown · Feb 28, 2006

I guarantee that even if it doesn't make a profound effect on your son now, it is something he will cherish later in life. Thanks for the reply and keep up the work.

comet

rising rust floor pans

dtwood456

New member

dtwood456

New member

cometbrown

New member

dtwood456

New member

dtwood456

New member

dtwood456

New member

cometbrown

New member

Similar threads

Members online

Latest posts

Forum statistics