project71
New member
- Joined
- Nov 5, 2013
- Messages
- 17
- Reaction score
- 6
Getting ready to re-paint my Bronco.How do I get the body side mouldings off? Is there a trick to it or is there a special tool needed?
Body side mouldings
- Thread starter project71
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Some moldings just "pop" off.., some have bolt-on clips..... (3 types)
Go to www.tomsbroncoparts.com At their site, you'll see the diff. types of clips.
There's a good chance you'll need a few new ones as the plastic ones may break due to "brittle" condition.
www.wildhorses4x4.com also has a good "blow-up" view of the diff. placements of the clips.
Go to www.tomsbroncoparts.com At their site, you'll see the diff. types of clips.
There's a good chance you'll need a few new ones as the plastic ones may break due to "brittle" condition.
www.wildhorses4x4.com also has a good "blow-up" view of the diff. placements of the clips.
