tjg8675
Member
- Joined
- Sep 3, 2007
- Messages
- 92
- Reaction score
- 4
Hi All,
Just wondering if anyone can help me with the correct procedure for replacing the transmission mount in my 1995 bronco A4OD.
I'm just not sure where the safest location to put my floor jack so I don't mess up the transmission, I know it is a easy job but understand
that it is a very heavy lift involving lifting the engine and transmission a few inches.
My mechanic says OK to lift from transmission pan with a wood block on the jack, but I'm not to sure about that after
watching a couple videos online that do not recommend lifting by the pan.
Hoping someone here can confirm that info before I mangle it by putting all that weight on the pan.
I do not have a transmission jack BTW, hoping to use standard floor jack with a large wood block.
Thanks
Just wondering if anyone can help me with the correct procedure for replacing the transmission mount in my 1995 bronco A4OD.
I'm just not sure where the safest location to put my floor jack so I don't mess up the transmission, I know it is a easy job but understand
that it is a very heavy lift involving lifting the engine and transmission a few inches.
My mechanic says OK to lift from transmission pan with a wood block on the jack, but I'm not to sure about that after
watching a couple videos online that do not recommend lifting by the pan.
Hoping someone here can confirm that info before I mangle it by putting all that weight on the pan.
I do not have a transmission jack BTW, hoping to use standard floor jack with a large wood block.
Thanks
Last edited by a moderator: