newbie building a mudracer

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

junkyrddog780

New member
Joined
Mar 26, 2007
Messages
1
Reaction score
0
Hi my names Shane. I have a very rusty and beat up 1986 bronco that was given to me for free. It used to be a plowtruck. It has the 5.8 ** with the 4v carb, better heads, roller cam and roller rockers. It also has the optional 9 inch rearend. The tranny and transer case were rebuilt before the previous owner bought it. I drove(powerslid and donuts) it once around the field once and parked it. When I tried to start it again a while later the mice had chewed wires and it wouldnt work. So later I found out about a couple mudracing parties that friends of a friend have. I figured it would be the perfect candidate to lay some smack down on all the chevys that run. I currently have the dash ripped out and Im getting help to rewire it to start, run and charge the battery only. Push button start and one toggle switch to shut it off. 90% of the body is gonna be cut off. besides i need a new field beater since I have a rod knocking in my cherokee. So just dropping in to say hi. Ill see if I can post some up to date pics later.

Shane

 

Roadkill

New member
Joined
May 29, 2005
Messages
940
Reaction score
7
Location
Killeen, TX
Welcome to BroncoZone. > Looking forward to some pictures with 20 foot rooster tails at all four corners.

 

Members online

No members online now.

Forum statistics

Threads
22,704
Messages
137,136
Members
25,432
Latest member
Virgil3rd
Top