High Idle

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

uscdiver

New member
Joined
Apr 4, 2005
Messages
30
Reaction score
0
Location
San Diego, CA
Hello all,

I have a '94 Bronco 5.8L and it is running fine, but it is idling at 1800-2000rpm. I was told it could be the TPS sensor . . . replaced it and still have the problem :huh: .

Any suggestions?

Thanks! diver

 

Bradt

New member
Joined
Oct 25, 2004
Messages
248
Reaction score
0
Location
Georgia
could be your IAC. Take off your throttle body, give it a good cleaning with BG, and make sure the valves are functioning. While you're at it clean your IAC out with the same stuff.

brad

 
OP
OP
uscdiver

uscdiver

New member
Joined
Apr 4, 2005
Messages
30
Reaction score
0
Location
San Diego, CA
Bradt - Sorry for the ignorance . . . I don't know what IAC and BG are.

Thanks for the help!

diver

 

Bradt

New member
Joined
Oct 25, 2004
Messages
248
Reaction score
0
Location
Georgia
BG Air Intake System Cleaaner. It's basically a carb cleaner that won't damage the coating Ford likes to put on the throttle body. It's probably in parts stores, but I know the dealership carries it if not.

IAC = Idle Air Control. It's that cylinder looking thing on top of the throttle body.

brad

 
Last edited by a moderator:

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,626
Messages
136,732
Members
25,290
Latest member
Gasman80
Top