couple questions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

89broncobuc

New member
Joined
Apr 12, 2009
Messages
19
Reaction score
0
i have an 89 XLT and was wondering if i could swap the nose of the body for a newer model and how new can it go? Also my truck has a 4 inch body lift and i wanted to add suspension lift.(going with bigger tires) curious as to wh

at brands will be the best for a coil lift. oh and one more thing. my coolant temp gauge stopped working.. how do I replace it?

any help is greatly appreciated.

 

Yardape

New member
Joined
Sep 18, 2006
Messages
2,414
Reaction score
5
Location
Alberta
In my signature is a link to my supermotors page, I did this swap a couple years ago and took a bunch of pisctures along the way.

 
OP
OP
8

89broncobuc

New member
Joined
Apr 12, 2009
Messages
19
Reaction score
0
In my signature is a link to my supermotors page, I did this swap a couple years ago and took a bunch of pisctures along the way.
what year was it before and what year nose did you use for the swap? was it a direct fit or were modifications needed? i appreciate the help.

 

Yardape

New member
Joined
Sep 18, 2006
Messages
2,414
Reaction score
5
Location
Alberta
Mine is an 89. I bought a 95 f150 that had a dash fire. You will need the radiator support, and all the obvious sheet metal, front bumper mounts will need to be fabricated and the cowl is different also. The sides of the cowl that are screwed to the little tabs on the fender mounts are 1 inch off on each side so you will need to figure out how you want to mount that. I drilled the rivots out of the tab bracket of the donor truck, kinda hard to explain but you will see what I mean, I still havent mounted the new tabs. Other than that its a basic, fun and rewarding swap.

 
OP
OP
8

89broncobuc

New member
Joined
Apr 12, 2009
Messages
19
Reaction score
0
Mine is an 89. I bought a 95 f150 that had a dash fire. You will need the radiator support, and all the obvious sheet metal, front bumper mounts will need to be fabricated and the cowl is different also. The sides of the cowl that are screwed to the little tabs on the fender mounts are 1 inch off on each side so you will need to figure out how you want to mount that. I drilled the rivots out of the tab bracket of the donor truck, kinda hard to explain but you will see what I mean, I still havent mounted the new tabs. Other than that its a basic, fun and rewarding swap.


so and 89 to 95!! thats awesome and thats about the spread i had in mind! I appreciate your help and will save pics to post when i do the swap! thank again.

 

Members online

Forum statistics

Threads
22,648
Messages
136,855
Members
25,351
Latest member
Motormouth2025
Top