c4 trans pan

[bartowb]

i added a b and m deep sump trans pan to my bronco i also added headers to it. the problem im having is with the headers and pan i am unable to use the stock dipstick. was wondering if anyone had any ideas on how to get around this problem or other ideas. any help would be appreciated

 

[Crude dude]

Usually a custom pan comes with a custom tube and dipstick. Have you contacted B&M to see if they offer one? I bought a custom aluminum deep pan from Hughes and it came with one.

 

[bartowb]

the only thing my pan came with was an addapter for the pan. got ahold of b and m and that is all they said they have. they said that they don't have one because it would take to much on there part to try and adapt for variying things such as headers. so as of now im stuck. going to try lokar stick but it still has an elbow like the original stick.

 

[Crude dude]

Before you buy anything, look up a picture of the B&M pan and a picture of the Hughes pan. If they are remotely close give Hughes a call. I doubt Hughes actually has these pans cast just for themselves. It may be the same pan and I know Hughes has a dipstick and tube for theirs. Good luck