whytee95eb
New member
- Joined
- Nov 25, 2009
- Messages
- 2
- Reaction score
- 0
ok, so my auto hubs went bad, took them out, so i bought manual hubs. iv read somewhere that i may need a kit to convert it? im not sure, wouldnt think so. and another question is on my passanger side, when i tried to put the hub in, the shaft that slides in the hub seemed bend, as it was pushing the hub along the side of the housing. now, another concern is sometimes..not recently howerver, when i turn either direction and im coming back to forward, my wheels dont want to follow through the correction, as if they were stuck turning or my alignment was off, just replaced a radius arm bushing, maybe that helped. any suggestions or comments would be greatly appreciated
95 351 EB
![bronco.jpg bronco.jpg](https://www.broncozone.com/data/attachments/6/6379-1423adb4f67e082f2cf20dcbfd60b20f.jpg)
![bronco.jpg bronco.jpg](https://www.broncozone.com/data/attachments/6/6379-1423adb4f67e082f2cf20dcbfd60b20f.jpg)