Window Rolling Up

s2 Terror (javier) · Mar 4, 2004

This is for my friends 89 full size bronco. Well since he isnt really good with tools he asked me if i could fix his window.

Ok the problem is that when the window wont roll up on the passenger side. it seems like it wants to catch but it wont. the motor works but i havent taken off the panel to see exactly whats wrong.

any help would be helpful.

thanx..

javier

fordman · Mar 4, 2004

It is most likely the motor gears are stripped . OR the motor attachment bolts are loose . To replace the motor you need to drill a half inch hole where the dimples are in the door sheet metal.

Shadow_D · Mar 16, 2004

You might also want to check the nylon bushings inside the motor. Replacing the motor is expencive but I found a repair kit on eBay that fixed this problem perfectly. It cost me under $10 for 2 kits and I fixed mine in about 1.5 hours from start to finish. A lot cheaper than up to $100 for a new motor.

Shadow_D · Mar 19, 2004

If you do go with the bushing replacement here is the link to a set on eBay.

I have bought these kits from this seller and have had no problems.

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33706

Hope this helps. Also he sells these all the time so if these are gone when you look at it check his other auctions chances are he will have a few more sets available.

Window Rolling Up

s2 Terror (javier)

New member

fordman

New member

Shadow_D

Active member

Shadow_D

Active member

Similar threads

Members online

Latest posts

Forum statistics