Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Does anyone have a timing mark like this? ive never set timing on one that only has a point. im guessing thats 0 but im not sure. And does anyone know what i should set mine to? its a 351m with stock ignition, a mild cam, dual plane low rise intake, and a 4 bbl 600 carb.
Can't see the number's on the balancer. When the hash mark's line up with the pointer that where the timing is at. Try and set it at 8 BTDC or in that area. All motor's are different you'll have to play with it.
do you know how to set your timing at TDC (top dead center) ? do that and then just slowly adjust from there, you wont need to use the timing mark, thats how i set mine, just make sure you dont advance it and make it pinp, thats very very bad for your engine
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.