Removing the interior paneling

[BigSpenc]

I've decided to put Herculiner on the interior of my 94' Bronco. I have pulled all the seats out as well as the carpet and am trying to pull the interior paneling off so that I can remove the carpet over the wheel wells. I have removed all the screws that I could find but while the panel is loose I still can't manage to get the panel off. Does anyone have a diagram of all the connectors for this panel or if anyone could help it would be greatly appreciated.

 

[Seabronc]

I believe there are a few blind clips holding it. If you can get your hand behind it, you may be able to get close to where they are.

Good luck,

 

[miesk5]

yo BIGSPENC,

When removing panels retained by pushpins, use Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent to carefully pry trim panel from inner panel. Replace any bent, damaged or missing pushpins.

I use better-half's old meat fork.

Refer to the following illustrations for removal and installation of trim panels.

Parts Break-Out Diagram in 92-96



Trim Panel, Body Side, Lo-Series, Bronco

Item Part Number Description

1 — Panel Assembly, Body Side Inner (Part of 27864)

2 31012 Quarter Trim Panel

3 381801-S58 *****

4 385402-S58X *****

5 381801-S58X *****

6 601B32 Cover, Rear Seat Shoulder Strap Retractor

---



Quarter Trim Panel, Custom XL, Bronco

Item Part Number Description

1 31608 Armrest Support

2 31604 Armrest Base

3 24100 Front Arm Rest Pad

4 62866 Ash Receptacle Assembly

5 24146 Armrest Clip

6 31012 Quarter Trim Panel

7 N803414-S58 ***** (2 Req'd Each Side of Body)

8 N610963-S58 ***** and Washer Assembly (2 Req'd Each Side of Body)

9 380934-S36 ****** Drill Point (4 Req'd Each Side of Body)

10 N803103-S58 U-Nut (2 Req'd Each Side of Body)

--



Quarter Trim Panel, Hi-Series, Bronco

Item Part Number Description

1 27840 Body/Side Trim

2 390934-S36 ****** Drill Point

3 — Bracket (Part of 27840)

4 31012 Quarter Trim Panel

5 N800943-S303 ****** Round Washer Head

6 381801-S58 ***** and Washer, Oval Head

7 N800942-S58 ***** and Washer, Oval Head

8 601B30 Rear Seat Shoulder Strap Opening Bezel

====



Body Side and Roof Rear Garnish Mouldings, Bronco

Item Part Number Description

1 517C04 Roof Trim Rear Moulding

2 29004 Quarter Window Garnish Lower Front Moulding

3 N8071545-SW Pushpin (6 Req'd Each Side)

4 N807372-S Pushpin, Nylon (2 Req'd Each Side)

5 29010 Quarter Rear Window Garnish Rear Moulding

6 29126 Body Side Window Garnish Moulding Front Bracket

7 N800486-S9 Bolt and Washer

8 N801157-S58 ***** and Washer (2 Req'd Each Side, 1 Req'd Center)

9 518B34 Roof Trim Rear Moulding Joint Cover

10 29070 Body Side Window Garnish Moulding Bracket

==

pushpins in orig interior colors are still avail from Ford dealers; some will order them for you, others don't bother

Trim Color Code, Interior Location in Door Jamb Label (Data Plate, also referred to as the Patent Plate & the Warranty Plate) pic in a 95 The letters and/or numeral under BODY designate the interior trim, seat and body type.

Ford part number N808658-SSD (Mocha Tan) in a 95



Source: by Jon F ("The Bronco")

These come in black, and some use Vinyl or plastic paint or dye to color them

Trim Panel Retainer, Interior, Plastic in 92-96 (Xmas Tree, Dorman part #700-771 pic

Source: by Dorman http://www.dormanproducts.com/catalog/hardware2006/397-402_Sec20_Part4.pdf

Trim Panel Retainer, Interior, Plastic in 92-96 (Xmas Tree, part # N19374) (New URL as of JUN 2010) Bottom Head Diameter: 19/32" - Stem Diameter: 9/32" - Stem Length: 27/32"

Source: by northland fasteners http://shop.northlandfasteners.com/N19374-Trim-Panel-Retainer-N19374.htm;jsessionid=7B7DAA040FC24851FB3C92DE5104546F.qscstrfrnt03

more interior trim LINKs in my site @ http://www.broncolinks.com/index.php?index=322

 

[BigSpenc]

Thanks miesk5