MY New Project EB 76 Mexico

[Pericon]

Hello guys I would like to share my new project.

EB 1976, 302.

In the future: 33s. 2" body lift, 4" superflex suspension, bedlock wheels.

All this upgrade will be homemade.

I will upload more picture of the progress.

Please let me know your comments and suggestions.

 

[Recko555]

Looks like a good project. Have fun.

Gabe

 

[Scott Andrews]

Looks like a fun project!

So haw far down will you take it before the rebuild?

S

 

[Pericon]

Here are some pictures of the progress.

New suspension, homemade. 4.5"

With the 33s.

 

[Broncoholics]

Homemade 4.5" lift? Is that using spacers under the lower coil cup and blocks in the rear?

Good luck, sounds like fun!

I'd post photos of both my build ups I'm doing right now but never seem to get around to it.

Good work on the photo progress!

Plus both are looking rather ***** looking right now!

 

[S_bolt19]

Looks like you have a lot to work with, I see you have power steering, hydro-boost & front disc brakes. That is a helluva starting point. That bracket on the front pass side of the engine block, looks like a mount for aftermarket A/C too.

Great vehicle to get!

 

[Pericon]

Broncoholic please place a link to see your work, I;ve been trying to see without succes.

 

[Ivan MR]

here is another pic of this project...

we are working on this 76 bronco at my garage

 

[Ivan MR]

for the front we fabricated these spring stops.

the springs are longer than stock and somewhat stiffer, they are not attached at the top, so whenever pericon is ready he can go long arm.

we didn`t use blocks for the rear, instead we flipped the rear shackles like so:

 

[Pericon]

Here is a picture on how is it going.

New adds

38.5 gumbo monster mudders

4.88 dif gears

12,000 lb warn winch

On board air system

 

[76Explorer]

That bracket on the front pass side of the engine block, looks like a mount for aftermarket A/C too.

The bracket held the smog pump, looks just like mine except the dip stick is on the wrong side, any info on that?

 

[NE WEAR]

The bracket held the smog pump, looks just like mine except the dip stick is on the wrong side, any info on that?

Also, is that a PS cooler sticking up on the driver's side? My '77 does not have one.

jeff

-------

 

[Broncoholics]

heehee!! I've been keeping my Bronco locked away from cameras lately.

But I'll be doing some writeups here soon as I'm almost done.

Right now I have the HPD60 and D70 installed with the Cage 5.5" lift, Chromoly 35 spline axles, Ator drive flanges (instead of hubs), Trail Ready bead locks, New 38's, 1350 Drivelines, 3/8" diff covers, stone crusher steering, ram steering, stretched the wheel base 1" forwards and 4" back to a total gain of 98".

Right now I'm installing brake lines, filling in the rear wheel wells after cutting/pushing them back 4", gas tank relocation, tie cage to frame.

 

[Pericon]

Here is an update of my EB almost finish.

 

[Pericon]

ALmost Finish, just missin to change the axle gears rims & tires.

 

[S_bolt19]

Looks real nice! Couple of questions, #1 what type of seats are those, I like them and #2 did you build your own cage or buy it? But I really like the colors and the stripes just stand out. Looks great.

 

[Pericon]

Those are the factory seats i just change the cover and add the head rest from another old car seats.

The I built my cage 8 points.

Thanks for the comments I upload some pictures in action.