My 78 Bronco Project

[custom_78]

Tool I'm using to cut it out.

Esab Plasma Cutter.

 

[custom_78]

This is the inner fenderwell after it was cut out.

After:

 

[custom_78]

The engine cage all cleaned up and sanded ready for primer.

 

[custom_78]

More pictures after tonights progress.

Back in the garage and the top is off again.

 

[custom_78]

The engine cage all primed.

 

[custom_78]

Working on the rollcage again. Added a bar across the back of the cage.

 

[custom_78]

Another picture

 

[custom_78]

Adding bars in between the two hoops

 

[custom_78]

Just another

 

[custom_78]

K&N filter I got for free because it's 12 x 4". My dads friend couldn't find a chrome top so he gave it to me. I'm going to make an aluminum top and polish it.

 

[drcarter0734]

Man, that is one hella of a Bronco you have going there. It looks like you have some serious time involved. Very nice.

 

[custom_78]

Couldn't get the picture to load last night for some reason. Didn't get much done yesterday but the custom made air cleaner top and bottom.

 

[custom_78]

Heres the top on the air cleaner

 

[custom_78]

Heres the top and bottom after I rolled a bead into it.

 

[custom_78]

Here's how I polish the top plate. Using a bench grinder with a polishing wheel on it.

 

[custom_78]

Here the finished product all polished

 

[custom_78]

Had to one of these things to put it on my Bronco.

 

[custom_78]

Didn't need the adapter but thats all that Kragen had. I only used a 1 1/2" riser. Here's what it looks like on my Bronco.

 

[custom_78]

Another. ^_^

 

[custom_78]

Heres a picture of the rocksliders all sanded and primed