lift an 86 Bronco

[Muddybronco86]

Can you use a f150 or f250 leaf springs and front springs to lift your bronco 4-6 inc..

I have a 86 Bronco so if I use an 86 f150 or f250 will it lift it?

 

[miesk5]

yo, I haven't seen anyone post such a swap on the net yet, but why not?

of course you'll need more to complete the lift; such as,

extended radius arms

extended braided steel flexlines

caster adjuster

etc.

Here is some Information by Manufacturer: Coil Spring Rates, Coil Spring Free Lengths, New Rear Spring Pak Spring Rates, Radius Arm Lengths, Add a Leaf Spring Rates

Source: by Patrick N at delta4x4club.com @ http://www.delta4x4club.com/TECH/FORD/lifttech.html

and Superlift® Installation Instructions

Source: by superlift.com to see what else you need to complete the install

and combine that w/Superlift® 6 inch Installation in an 89 Source: by BrianS

btw, you can call or e mail EATON and / or ask same Q in the Eaton Forum @ http://www.eatonsprings.com/forums/forumdisplay.php?f=23

GL!