BIGDADDYSAUGEYE
New member
- Joined
- Jul 20, 2009
- Messages
- 4
- Reaction score
- 0
I WANNA DO A 3 INCH BODY LIFT AND WONDERED IF I WOULD HAVE TO DO ANY MODS LIKE LONGER BREAK LINES OR STEERING COLUMN OR ANYTHING ELSE?
GOT A QUESTION?
- Thread starter BIGDADDYSAUGEYE
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
BLADE262US
Active member
A good kit will come with the steering column extension . Thats about all you will have to do besides the spacers , 
/emoticons/[email protected] 2x" width="20" height="20" />
/emoticons/[email protected] 2x" width="20" height="20" />
Miss Kitten
New member
you may have to fiddle with the tcase linkage too to get it to line up properly
Good advice; and here are some Tips by Reptillikus
Installation, Performance Accessories 3 inch by Todd H
Todd shows where the shifter hits floor pan
Installation, Performance Accessories 3 inch in 92-96 by Cameron C (iggie the 92-96 part about the "crumple zone" in 92-96 frame horns
-
Insert your bronco's specs in signature for better replies in future; YEAR, ENGINE TYPE, TRANNY, etc.
GL!
Installation, Performance Accessories 3 inch by Todd H
Todd shows where the shifter hits floor pan
Installation, Performance Accessories 3 inch in 92-96 by Cameron C (iggie the 92-96 part about the "crumple zone" in 92-96 frame horns
-
Insert your bronco's specs in signature for better replies in future; YEAR, ENGINE TYPE, TRANNY, etc.
GL!
