fuel pump

[pete42]

Hi all glad to come aboard first car was a new bronco had a **** of a time payin for it win i graduated long time ago. I found a[94 bronco] the outher day been running ok

went to start it no luck cant hear pump tested wires at pump no volts pink/ blk grounded at eec still no power ??? please help pete

 

[2percent]

Have you tested the Fuel pump relay or eec relay? Also trace the wires to make sure there are no breaks. In my 89 it ended up being the eec but this is rare I am told. Im not sure what year but I know they did have fusible link in some wires.

 

[famousguy_fsas]

Check the cintrifical. Fuel pump switch. It will be found on the pass side floor boards under the dash. Right where the carpet stops u will see it. It should have a little red reset button. Just press it and start the truck

 

[pete42]

( Thanks for quick replys ill look for breaks in wires today as for as the reset switch i pushed it it didnt budge ? i cant get a volt reading at the tank where the plug is ???

 

[miesk5]

yo,

Test it using this Wiring Diagram in a 95

Source: by Seabronc (Rosie, Fred W) at http://broncozone.com/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=5799

Ck for continuity between DG/Y and PK/BK; disconnect it and test the switch or back probe it w/staright pins on meter's clips.

if good, then go thru da drill to the pump

--

I can't fig out where you tested da pk/black at?

try this first;

Test & Diagram at the Diagnostic Link Connector in 84-95; "...Connect FP Relay to any ground to force the fuel pump(s) on when the key is in RUN..."

Source: by Steve83 (Steve, That dirty old truck) at http://www.supermotors.net/registry/media/245234