extended radius arms

[stinger]

Any one know the specs for building extended arms for the TTB /emoticons/[email protected] 2x" width="20" height="20" /> . I had factory made extended arms (superlift) the old box style with the holes thru, Drivers side broke off at the axle , pass side looks cracked on the top ear that sheared off on the d side. :angry:

Any one made there own ?

 

[tiller83]

superlift waranties their parts and posibly has corrected the issue on newer maufacture, try to return them. if anything you will make them aware of a possible problem with the design. i returned some springs and they seemed concerned about what the problem was and what could have caused it. the shipping charge will be alot less than just the raw materials for a home made pair......i'm pretty sure you won't get it perfect the first time and when dealing with the front end of a street driven vehicle,you want perfect. i did a sas with james duff arms...good thing they were adjustable cause my frame is out of line. these things are tough,tough,tuff. and i gained more steering controle. $-)

 

[miesk5]

yo!

Here are a few; more fab LINKS in my broncolinks.com site under STEERING, RADIUS ARM

Extended Fabrication & Installation in an 83 (some pics are gone)

Source: by Gremlin at SuperMotors.net via web.archive.com

**** Cepek Extended Installation pics in an 86

Source: by Gacknar (The Mall-Crawler, Jeremy, "Big grey megga beast") at SuperMotors.net

Fabrication & Installation Info & pics in a 90

Source: by 90Beater

GL!