can,t start after a while

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

swedish bronco fan

New member
Joined
Jan 9, 2012
Messages
1
Reaction score
0
hi I'm a stupid Swedish have had problems my dear .

When he is cold and has been in about a day to start the wonderful but when you then turn him off and let him stand for an hour or so he refuses to start .

he gets gasoline and spark . sorry if I write weird but my English is not the best. I thought it was more fun to ***** with volvo cars during school hours;). it,s a 302 efi 1988 xlt

 
Last edited by a moderator:

BroncoJoe19

Active member
Joined
Dec 26, 2007
Messages
2,093
Reaction score
17
Location
New Jersey
Pull Diagnostic Trouble Codes (DTCs) From your onboard computer.

 

Your engine is computer controlled.

 

The computer uses sensors to tell it a number of different things and it controls actuators that push or pull mechanical levers (kinda). If one or more sensors aren't working properly, the computer goes "blind" and doesn't know what to do. If the computer can "see" but one of the actuators is broken and therefore can't follow the commands of the computer; the engine won't run correctly. The computer is preprogrammed with set values for each of its sensors, and each of its actuators. It will run a self check of all systems, like the space shuttle; it will compare its set value(s) to the value(s) it recieves from its sensors, and actuators. If any sensor or acutator is out of the "normal" range the computer will generate a "code." It will generate some codes on the fly, and others will be stored while you are driving. There is a simple method to "pull codes" out of the computer for one to use for diagnostic purposes.

 

Earlier versions of On Board Diagnostics OBD 1983-1995 can flash the error code to the dash board and can be pulled in one's driveway without any special tools.

 

Later versions of On Board Diagnostics OBDII some 1995, and pretty much all 1996 and newer, require one to use a code reader or scanner tool.

 

Some auto parts stores will scan your engine codes for FREE, you may want to call around. Some will scan OBDII but not the older (prior to 1996) OBD systems.

 

SO here you go...

 

How to scan FORD on board Diagnostic Trouble Codes (DTCs) in your driveway

 

HowTo Pull Codes 1983-1995 Broncos, Mustang, F series Trucks, Econolines, 302, 351 and more

 

 

Members online

No members online now.

Forum statistics

Threads
22,667
Messages
136,905
Members
25,367
Latest member
BobButtertone
Top