Alternator Pully

[sreaminbronco]

Does anyone know how to take the alternator pulley? I have already taken off the nut and washer behind it but i dunno where to go from there.

 

[Bully Bob]

I believe they're pressed on /emoticons/[email protected] 2x" width="20" height="20" />

 

[BLADE262US]

If you took the nut off it will just pull off they are not pressed because there retained by a nut . The power steering pulley is pressed on . When you take the alternator pulley off pay attention it goes nut,lock washer , pulley , fan , spacer , DO NOT LOOSE THE SPACER . /emoticons/[email protected] 2x" width="20" height="20" />

 

[sreaminbronco]

It wont slide off we pulled and pulled but it wont budge theres still the lock washer in there but we dunno how it get that out. And I have another question can you take the crankshaft pulley off without taking out the internal stuff and just take off the pulley? I bought a MARCH performance pulley system and it replaces the crankshaft but my chiltons manual didnt cover the pulley just the shaft.

 

[Seabronc]

Normally you need a pully pulling tool to get most of them off.

Good luck,

>-