92 ford bronco

[rogmit]

on my 92 bronco 351w irecently had my motor rebuilt and now i'm reassembling it, but it has been 4 months now and i'm having aproblem with the inlets on the throttle body, i think the top inlet goes to the lower intake but i don't remember what gets connected to the other,i need help,this is the last thing i need to do so i can start it and start driving it again----i'm not talking about vacuum lines, someone asked that,i think both of these inlets on the throttle body have antifreeze flowing thru them

 

[ocalabronco]

are you talking about vaccum lines? do us a favor, go back and clean up your post. some punctuation and a definite problem

 

[rogmit]

are you talking about vaccum lines? do us a favor, go back and clean up your post.  some punctuation and a definite problem

27295[/snapback]

​

no antifreeze is flowing thru these lines if i remember right, what are you a school teacher asking for punctuation corrections, i've got enough problems without someone scolding me about puctuation

 

[BLADE262US]

The upper one goes in a special fitting in one of the heater core hoses and the lower one looks to go into a water passage in the intake ( its dark outside limited light) But I rememeber hooking that one into the intake . In warmer climates those hoses are optional they heat the throttle plates so that there is warm air coming into the intake when its very cold kinda like the carb setups where the bypass hose at the end of the air cleaner would close a flap in the front and make it pull air from down by one of the exhaust manifolds . /emoticons/[email protected] 2x" width="20" height="20" />

 

[ocalabronco]

no antifreeze is flowing thru these lines if i remember right, what are you a school teacher asking for punctuation corrections, i've got enough problems without someone scolding me about puctuation

27297[/snapback]

​

no, but it does make it a **** of alot easier to understand your question when the sentences actually END