1991 front

[Kal-El]

I just bought a 91 Eddie Bauer and love her. I loved the looks since high school and she easily tows my boat. I also like to work on my cars so tend to try to fix everything myself. She had a squeek coming from the passenger front wheel so I attempted to take it off and broke a bolt. I took off the hub and noticed that the cap that says 4x4 had been pretty beat up on the inside so I took off the driver's side cap to check for damage. The automatic 4 wheel drive has a different part (and I assume the correct one) on the driver's side so no damage. Easy fix, but could somebody please tell me what front and rear I have on my Bronco or tell me how to figure it out. It is a 5.8 if that matters. Thank you for any help.

 

[BLADE262US]

It will undoubtably have a dana 44 TTB up front and a ford 8.8 in the rear and if I had to bet theres pretty good odds that it has 3.55 gears . There should be a tag on the rear that will tell you the ratio . /emoticons/[email protected] 2x" width="20" height="20" />

 

[Kal-El]

It will undoubtably have a dana 44 TTB up front and a ford 8.8 in the rear and if I had to bet theres pretty good odds that it has 3.55 gears . There should be a tag on the rear that will tell you the ratio .  /emoticons/[email protected] 2x" width="20" height="20" />

25665[/snapback]

​

Thank you.

 

[Seabronc]

You can also look at the Safety Compliance Sticker on the driver side rear door post for the axle code. If it is the original axle the code should match the tag ex. code 19 = Ford 8.8 3.55.

Good luck,

>-