Yoke replacement

[DLR]

Hello, can you help me where to find a driveshaft rear ****** yoke replacement for a 1995 5.8 Bronco limited slip 8.8, drive, shaft number F1 tz-4602. Need help with this, THANKS

 

[Tiha]

I am in Iowa, here we have Inland truck parts. They build driveshafts from scratch. I am sure they can get one.

So maybe look locally for a driveline shop?

As I am sure you did, when I google that number it comes up as a complete driveshaft.

Then there is a u-pull-it yards. You can probably get the whole shaft, take the piece you need and pitch the rest for the price of a new yoke at a driveline shop

 

[DLR]

Thanks! I prefer getting new one. The number on the yoke should be that part ? ( Spicer C22-661 16) any more help from ya'll would be great !! Thanks!

 

[DLR]

1995 driveshaft ****** yoke

 

[Tiha]

That helps,

This is what I come up with on Spicer site. Might grab a caliper or tape measure and compare measurements.
https://www.danaaftermarket.com/spi...&md=Bronco&cp=0&catalog=PIMS_NA&partType=PART

2-2-1369 Drive Shaft ****** Yoke

From $30 on up at amazon. Or hit google and see lots of options.

 

[DLR]

Thanks!

 

[johnnyreb]

Thanks! I prefer getting new one. The number on the yoke should be that part ? ( Spicer C22-661 16) any more help from ya'll would be great !! Thanks!

Try Green Sales in Ohio. Type it in your address bar--and hit enter--and watch their videos too. Hear is where to contact them--- Greessalescompany.com----800-543-4959---research line-1-513-731-3304--Monday-Friday-8:00 a.m--5:[email protected] have PEOPLE answering the phone and DO NOT put you on hold waiting. They are respectful and reliable people to do business with. Good luck. They have old --NOS PARTS --ALOT OF THEM.

 

[johnnyreb]

Try Green Sales in Ohio. Type it in your address bar--and hit enter--and watch their videos too. Hear is where to contact them--- Greessalescompany.com----800-543-4959---research line-1-513-731-3304--Monday-Friday-8:00 a.m--5:[email protected] have PEOPLE answering the phone and DO NOT put you on hold waiting. They are respectful and reliable people to do business with. Good luck. They have old --NOS PARTS --ALOT OF THEM.

Also check Jeff,s Bronco--I bought all the yokes for my 78 off of them.

 

[DLR]

THANKS!!

 

[johnnyreb]

Sometimes you might have to settle for a used part. Now days alot of the NEW PARTS----ARE JUNK---AND YOU ARE BETTER OFF GETTING A USED PART FROM A JUNK YARD

 

[NotaVegetarian]

Take a look this may help

Ford 8 Inch and 9 Inch Third Members - Identify 28 and 31 Spline Axles, Yoke Flange Width and Height

 

[johnnyreb]

Take a look this may help

Ford 8 Inch and 9 Inch Third Members - Identify 28 and 31 Spline Axles, Yoke Flange Width and Height

Welcome back Nota-how have you been doing?--Good I hope.