Latest activity
-
It isn't hard, but it is very time consuming to replace that panel. Don't know how else to describe it. Just have to jump in and start... -
L\Bronco reacted to Dadpool's post in the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes with
Like.
Yes there was no change so I got it replaced under warranty. Idle is smooth as butter with new iac and o2 unplugged, still bogs under... -
DDadpool replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.Yes there was no change so I got it replaced under warranty. Idle is smooth as butter with new iac and o2 unplugged, still bogs under...
-
L\Bronco replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.Ok cool, did you get a chance to unplug the IAC valve at hot idle and look for 500 rpm?
-
Jimbo26 replied to the thread Speedometer cable location/issue.No problemO, Rad 'Used cars' & witch-doctor Riggin buyer beware......X2 when it's free. 😏 You have a jigsaw puzzle on hand and the clues... -
Yeah that speed sensor you have is one made for the rear axle, it will not work with your dash and T case. The axle has an exciter wheel...
-
DDadpool replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.Just putting this out there. Here is vacuum with O2 removed. It looks to be breathing a lot better on the gage. Also, blocking the...
-
-
BBurnerF15 replied to the thread Recommend- an Insurance Company that will actually pay you, what the Bronco is worth..Grundy. Easy to work with and uses an agreed upon value. I pay $195/year for a $21,500 agreed upon value on my 1980 Bronco. No mileage...
-
L\Bronco replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.That is true on the cat, (sorry, but I'm going to throw another however in) On the old stuff youd have to do a decent drive on the hiway...
-
DDadpool replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.We will try those tonight and report back. It was a stock long block, so I would imagine it is a stock cam. On the cat though, from my...
-
L\Bronco replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.Hey Dadpool 44 is air injection system non functional (Which is removed) 25 is Knock sensor signal not received during goose test. You...
-
i agree that is a high number. Also as a rule of thumb, any time a blinker bulb lights up when it is not supposed to, that is a great...
-
Tiha replied to the thread AC circuit causes power surge??.i agree that is a high number. Also as a rule of thumb, any time a blinker bulb lights up when it is not supposed to, that is a great... -
Tiha replied to the thread Recommend- an Insurance Company that will actually pay you, what the Bronco is worth..How much do you plan on driving it? that will affect the price of insurance. I have a stated value policy through state farm. It is...
-
DDadpool replied to the thread 1989 5.0 Will not go in to closed loop, bogs when accelerated, no codes.Codes are as follows for KOER 44 13 25 Attached are vacuum levels at idle and 2500 rpm. It moves slightly with the rough idle, but stays...
-
