Latest activity
-
EI have a 1989 Ford Bronco 5.8L 351 that starts but idles rough and as soon as I give it gas it dies. There is a hissing sound from the...
-
Groovy, Not the 1st time I've heard of a LED be a issue on a older system. Hey 96B, does your rig already have the 3G alternator... -
Whatever it takes- and sometimes ya have to get C💥4 explosives involved. That eliminates All the issues🔥
-
WHey Jimbo, the hazard/sig lamps are the same filament in the taillights as the brake lights. When the hazards are on 12v will back-feed...
-
WHey Broncoguy! On a 96, part of the cruise circuits ground through the brakelights. When the brakelights activate, the ground goes away...
-
Jimbo26 replied to the thread Cruise control Gremlin.Groovy, Not the 1st time I've heard of a LED be a issue on a older system. Hey 96B, does your rig already have the 3G alternator... -
on a hunch… Replaced LED bulb with regular in High- mounted stoplight and… Cruise Control works normally.😀
-
Hey Jimbo, the hazard/sig lamps are the same filament in the taillights as the brake lights. When the hazards are on 12v will back-feed...
-
Jimbo26 replied to the thread Alternator Charging Issue.Whatever it takes- and sometimes ya have to get C💥4 explosives involved. That eliminates All the issues🔥
-
That sucks Led I have had luck put a good prybar between the bracket and the alt and pry like mad while holding the nut and running the...
-
Dang, yeah that sucks. Bolts today you never know. You can take a hammer and a chisel. Try to smash the nut a little if you can get...
-
Here you go, looks like a short in circuit 1 dark blue. Note, it is in a different connector than the air bag circuit, stuck switches is...
-
I have no idea where the factory alarms diagrams are. I can try to do some digging though. But I agree the alarm system is probably...
-
If you're looking for a way to upgrade your ride’s style and performance, check out Arena Wheel Co.’s stunning wheel lineup. From bold... -
-
L\Bronco replied to the thread Alternator Charging Issue.That sucks Led I have had luck put a good prybar between the bracket and the alt and pry like mad while holding the nut and running the...
