1993 Bronco power door lock issues..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bngeejmpr

New member
Joined
Sep 20, 2019
Messages
12
Reaction score
4
New to the Bronco world. I have a 1993 XLT, the power door locks barely worked so I replaced the Door Lock Actuator Motors on each door. The old motors looked awful, covered in dirt and muck. The new ones struggle to work. What else can I do ?

 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
9,071
Reaction score
1,019
Location
Floating in the Pacific
Yo Bngeejmpr,

Welcome!

Check connectors internally for corrosion and tightness.


F2 CHECK GROUND CIRCUIT AT RH SWITCH


Power Door Locks, F-Series and Bronco, Except Crew Cab


n10291d.gif

  • Using an ohmmeter connected to a known good ground, connect second lead to Circuit 57 (BK) at Pin 1 and Pin 5 on left door lock switch connector.
  • Measure resistance of each circuit.

Is resistance 5 ohms or less?




Yes


No




REFER to Door Lock Switch under Component Tests in the Diagnosis and Testing portion of this section. SERVICE as required.


SERVICE Circuit 57 (BK) for open circuit. RETEST system.








Power Window and Power Door Lock Switch Connector, Master, Left


n10867c.gif


 





Pin Number


Circuit


Circuit Function




1


57 (BK)


Ground Circuit




2


119 (PK/Y)


Lock Motors Feed/Return




3


171 (BK/W)


Power




4


120 (PK/LG)


Lock Motors Feed/Return




5


57 (BK)


Ground Circuit




6


313 (W/Y)


Front Window Regulator Switch (LH) to Front Window Regulator Motor (RH)




7


57 (BK)


Ground Circuit




8


227 (Y)


Left Window Regulator Switch to Left Window Regulator Motor




9


57 (BK)


Ground Circuit




10


400 (LB/BK)


Power




11


400 (LB/BK)


Power




12


57 (BK)


Ground Circuit




13


314 (T/LB)


Left Front Window Regulator Switch to Right Front Window Regulator Motor




14


57 (BK)


Ground Circuit




15


226 (W/BK)


Left Window Regulator Switch to Left Window Regulator Motor






While we're in the doors;

Power Window and Power Door Lock Switch Connector, Right
n10865c.gif

 





Pin Number


Circuit


Circuit Function




1


120 (PK/LG)


Door Lock Switch (Unlock)




2


118 (PK/O)


Door Lock Motor (Unlock)




3


171 (BK/W)


Power




4


117 (PK/BK)


Door Lock Motor (Lock)




5


119 (PK/Y)


Door Lock Switch (Lock)




6


333 (Y/R)


Window Regulator Switch to Window Regulator Motor




7


314 (T/LB)


Left Front Window Regulator Switch to Right Front Window Regulator Motor




8


400 (LB/BK)


Power




9


313 (W/Y)


Left Front Window Regulator Switch to Left Rear Window Regulator Motor




10


334 (R/Y)


Window Regulator Switch to Window Regulator Motor








Window Regulators


The door window regulators should be properly lubricated to provide ease of operation. The window glass mechanism should be lubricated whenever the glass channel or window regulator is removed, or excessive effort is required to operate the windows. To lubricate a door window mechanism, apply an even coating of Multi-Purpose Grease D7AZ-19584-AA or equivalent meeting Ford specification ESR-M1C159-A and ESB-M1C106-B to the window regulator rollers, shafts and the entire length of the roller guides as illustrated by the shaded areas.

n6024f.gif




I like the skyjacker m95s and others here like the bilstein 5100 or 7100s.





➡️Find out if speed control, if equipped, recall work completed by a dealership. Call local dealer or register and view status @ https://owner.ford.com; or @ https://vinrcl.safercar.gov/vin/ ... have VIN ready.
The affected vehicles were previously repaired using a wiring harness that is not compatible with the vehicle circuit polarity. As a result, the fuse is located in the output circuit rather than in the intended input power feed circuit, and may not offer the intended protection in the event of an electrical short to ground. This could result in an underhood fire. Dealers will install a new wiring harness, or replace the mating electrical component. east302 provided following for his 93 "I found the recall information on alldata...didn't know it was even there so that's a plus. Mine has the updated harness with two fuses instead of one, so it looks like the recall was addressed correctly."
Use this guide by jowens1126 @ https://www.fullsizebronco.com/forum...ml#post6530073
Note that the 93 recall is different that the other years.



Here is the 1993 Bronco Dealer Brochure in Google Drive @ https://drive.google.com/file/d/0B-x...NNcGprQTA/view

1993 Bronco Dealer Training Video via silver70 @ https://m.youtube.com/watch?feature=...&v=Fvne3bosE3s

1993 Bronco, Venezuela Commercial @







Free registration for some wiring diagrams (86 through 96) and Technical Service Bulletins, (80 through 96), same as by Ford @ BBB Industries- Premium Alternators, Starters, Power Steering Products | TSB's & Wiring Diagrams

GL!

Al



 
Last edited by a moderator:
OP
OP
B

Bngeejmpr

New member
Joined
Sep 20, 2019
Messages
12
Reaction score
4
Thank you for the information ! You have been a great help !!!

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,516
Messages
135,945
Members
25,118
Latest member
msgsnprtom
Top