Jump to content
66-96 Ford Broncos - Early & Full Size
Sign in to follow this  
lovemy93

tapping into Speed sensor

Recommended Posts

Hello....I need to find out where and how to tap into the speed sensor on my 93 Bronco. The new motor is in and I'm in the process of hooking up a stand alone transmission controller. My Mechanic tried to tap into the sensor on the diff. and the speedo is acting strange ,  when key is turned on the  needle jumps around . He is afraid of ruining the speedo so I thought I would check in here for some advise before going any further ….maybe there is another place to tap into ???...……..thanks in advance 

Share this post


Link to post
Share on other sites

Yo 93,

vss94bronco.jpg

If your 4WABS system is not working, You can tap into the 4WABS Control Module Connector 

Jumper 14 (CKT 530, LG/Y)to 21 (CKT 519 (LG/BK)

Jumper & 39 (CKT 491 (O/LB)to 22 (CKT 523, R/PK)..." 
Source: by Turbo Ghost

ABSConnectorw-jumpers.jpg

Or if 4WABS Is Working, open the harness to Connector and splice into those four wires about 4 inches from Connector.

 

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...