One cylinder head dirtier than other

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

89broncodude

New member
Joined
Sep 22, 2017
Messages
30
Reaction score
1
Long story short, I just changed my egr tube and was about to start putting the upper intake back on when I thought I would make sure my FPR was on tight enough. That's when I dropped my Alan wrench down one of the runners....like a ******* I didn't cover the lower intake up lol. 

So I pulled the lower Intake out to retrieve that little bastard and I decided to pull the valve covers to clean/change gaskets. That's when I noticed that there was a large amount of build up under the P/S valve cover and the valves were extremely dirty. However the D/S was extremely clean. Like suspiciously clean...

Any ideas? Bad headgasket?

Thanks  for helping a noob. Bought my bronco almost 2 years ago and havnt looked back since :)

20180111_232059_HDR.jpg

20180111_232107_HDR.jpg

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,878
Members
25,108
Latest member
Utahstroke
Top