Replacement Body Panels and Sheet Metal Parts

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bully Bob

TOP GUN
Moderator
Joined
May 23, 2004
Messages
3,844
Reaction score
12
Location
Boulder City, Nevada (Las Vegas area)
Wellllll..,

It depends on the gage of the metal & hole location if it has to bolt in (like a fender).

Some suppliers have aftermarket sheet metal parts..., AND also the OEM type, stamped from Ford dies.

Other suppliers have one or the other.

I would check www.Jeffsbroncograveyard.com  & www.Wildhorses4x4.com  for a couple.

I'm guessing there's others but, I have no first hand buying & replacing experience other than a fender apron.

 
OP
OP
R

redfishtony

New member
Joined
May 15, 2009
Messages
26
Reaction score
0
Location
Thomasville, GA.
Top Gun,

Thanks for the info. I was reading about some that didn't have the necessary holes in them and how hard it was to get them straight. I think I would rather stick to panels that are stamped on the original dies. Ill do a bit more research. TW

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,880
Members
25,108
Latest member
Utahstroke
Top