Tail Light and Cluster Fuse Blowing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

laborrega

New member
Joined
Nov 30, 2011
Messages
29
Reaction score
0
My 15 Amp tail light fuse and gauge illumination 5 amp are blowing all of a sudden.

They worked fine for about 2 months, and then they blew and i replaced them and they keep blowing.

Where should I start looking?

The brake lights work when pressing the brakes, it is the lights that turn on in the tail light when the head lamps are on that is not working.

Thanks guys!

 
Last edited by a moderator:

tiller83

New member
Joined
Jul 27, 2009
Messages
54
Reaction score
0
Location
baton rouge
If your courtesy light fuse also is blown then it's probably the light switch,but it could also be a wire shorting to the body or frame or the voltage regulator for the alternator not operating,check for any exposed or burned wire.those systems are connected at the fuse block by a common(always hot)wire and at the light switch.GOOD LUCK.

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,878
Members
25,108
Latest member
Utahstroke
Top