stock 9" rear on 79 bronco

fenris · May 19, 2010

I was wonderin on the stock 9" rear on the 79 bronco if both wheels turn or if its just one?

J&SBroncolvrs · May 19, 2010

Some had a limited slip rear end, some didn't

fenris · May 19, 2010

Do you know if a 1979 bronco Custom with a 9" 3.50 would have LSD?

Foul Al · May 19, 2010

fenris said:
Do you know if a 1979 bronco Custom with a 9" 3.50 would have LSD?

you will have to look at the tag on the pass side of the front of the rear axle. the tag should read 3 L 50 xxxx. the L means limited slip. most customs are bare bones bronco's. or you could jack up the ass end and start the rig and see what happens....

Fordified · May 20, 2010

Just as Al said, as long as your tag is still there it will tell you or jack the rear up and turn one of the tires by hand,They should turn the same way. My 78custom has a LS but it all depends on if the original owner wanted the option.

If you do have a LS more then likely it is going to function as an open diff now anyways from wear.

fenris · May 20, 2010

ok thanx yall

J&SBroncolvrs · May 20, 2010

If it says H2 on your VIN tag in the door jam, it's limited slip.

Johnny Reb · Jun 5, 2010

my 78 custom has a posi and my xlt has posi. Great set up. Goes anywhere.

stock 9" rear on 79 bronco

fenris

New member

J&SBroncolvrs

New member

fenris

New member

Foul Al

New member

Fordified

New member

fenris

New member

J&SBroncolvrs

New member

Johnny Reb

New member

Similar threads

Members online

Latest posts

Forum statistics