Tie Rod Flip Inserts

EvlFaust · Feb 2, 2010

Howdy;

I need a bit of help finding tie rod flip inserts and a reamer tool. I have scoured the net but can not find anything so far. I am putting a 5.5" suspension lift on my 95 Bronco that already has 4.5" in the rear from a shackle flip and 2" up front from a leveling kit. I would like to get a Superlift Steering System but the combined 7.5" goes beyond it's limit. I figure that a tie rod flip would remedy that problem.

Any help would be appreciated.

Thanks.

miesk5 · Feb 4, 2010

yo

Reamer size depends on what you TRE kit you use;

for da Reamer SOruce; try

Snap-On R121 is a 7 degree reamer. It's also a cleanup reamer that is really meant to be used by hand to clean up tapers. It is the cheapest option, will last for a dozen + reams when used with a drill and a good cutting fluid, and is close enough to 7.12 to work fine For some reason it's marked wrong usually it's $46.

GOODSON

7 degree taper tie rod reamer

Premium Tapered Reamers

Deburr or enlarge tapered holes

• Use by hand or with a powered driver to deburr or enlarge tapered holes for tie-rod ends or ball joints • Use in 1⁄2" chuck at approximately 40 RPM

&

Ball Joint/Tie Rod Reamer for 1/2" drill.1.5" per foot / 7.15 DegreeOverall length 6.5"Flute length 4.5"Minimum diameter 7/16"Large diameter 1"U.S. MADEPrice: $69.00

Is this what you want to do?

Chevy Part Numbers & pics Source: by Broncoholics at Ford Bronco Zone Forums

Chevy & Tapped DOM Steering Links by WFO Concepts in an 89 Source: by Andrew K (Andy351, das panzer, sloppy seconds, the magic carpet) at SuperMotors.net

This is for a heep, but..

Tie-Rod Flip Kit Installation Instructions 1.The 2044R Tie-Rod ...File Format: PDF/Adobe Acrobat - Quick ViewThe 2044R Tie-Rod Flip Kit includes a. Reamer and a Knuckle Tapered sleeve. Insert.The insert is shown on right and the reamer to be used is on the left........

Tie Rod Flip Inserts

EvlFaust

New member

miesk5

96 Bronco 5.0

Similar threads

Members online

Latest posts

Forum statistics