New Clutch

[SAYBYE]

Hi I need to put a new clutch in my 67 Bronco 6cyl. My book says that it has a 9 inch clutch. But I haven't found a "9" inch clutch. Grave Yard has them listed for V8s LMC has a 91/16 and Tom's has a 9.25, but you need to grind on the bell housing?? My Hollander's book says that nothing will interchange with my 67. Any thoughts anybody? Thanks

 

[Bully Bob]

Mr. Bye..,

'67 EB I-6 170 had two clutches.

A 9".., & a 9 3/8 HD

The 9" press. plate is marked with a "green" paint daub--the disc is marked with 4pink & 2black springs.

The 9 3/8 HD plate is marked with a "blue" paint daub----& the springs (6) are all gray.

I've seen both at the usual auto parts stores (websites).......I got mine (a re-built) at Pep Boys many yrs. ago....& it's still going strong.

Good Idea to re-surface flywheel as well.

Oddly.., it's prob. easier to pull the eng. to change clutch.

Once all the goodies are un-hooked that '6' comes out in about 30 min.

HTH

B