4X4RedNeck
New member
- Joined
- Dec 16, 2007
- Messages
- 30
- Reaction score
- 1
I really want a cold-air intake for my Bronco, but I see nothing for the '86 range. Do any of you know a site or tips for a custom one?
K&N or something like that
- Thread starter 4X4RedNeck
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yo!
How about:
This from our PAL! - Hood Scoop, Shaker type Installation in an 84 Source: by justshootme84 [/url
Intake, w/Mods, pics & info, through fender Source: by 90Beater
And;
am about to insulate the filter box, tbe TB plastic shield and air tube w/Thermo-Tec COOL TUBE HEAT SHIELD
http://store.summitracing.com/egnsearch.as...mp;x=31&y=9http://store.summitracing.com/egnsearch.as...mp;x=31&y=9
& from box to inlet At rad.
or using an equiv. commercial HVAC product that can w/stand gas, oil, water...
How about:
This from our PAL! - Hood Scoop, Shaker type Installation in an 84 Source: by justshootme84 [/url
Intake, w/Mods, pics & info, through fender Source: by 90Beater
And;
am about to insulate the filter box, tbe TB plastic shield and air tube w/Thermo-Tec COOL TUBE HEAT SHIELD
http://store.summitracing.com/egnsearch.as...mp;x=31&y=9http://store.summitracing.com/egnsearch.as...mp;x=31&y=9
& from box to inlet At rad.
or using an equiv. commercial HVAC product that can w/stand gas, oil, water...
Last edited by a moderator:
