Junction Block location?

[BronBronBronco]

Good morning all.

I am trying to locate the junction block location were the voltage regulator, amp meter,fuse panel,ignition switch,lighting switch come together. I looked on the outer firewall and also under the dash and did not see it.

I attached a schematic that shows this component which I am having a hard time locating. Any and all help is appreciated.

 

[Bully Bob]

Not sure what veh., stock or aft. market wiring.., etc.

May need more info. but..,

I think you're refering to the plug(s) just to the left of the master cyl.

 

[oleguy74]

when posting for help remember to put year of your bronco as changes were made to some things over the production years.

 

[BronBronBronco]

when posting for help remember to put year of your bronco as changes were made to some things over the production years.

Thanks BullyBob & oleguy74. The Bronco is 1969 with a 302.

I think you are right BullyBob as that is more of a block than it is a connector.

I will pull it apart and look for corrosion or a bad fit.

Thanks!

 

[Bully Bob]

FWIW.,

I use lime-away & Q-tips to clean elect. connectors, female plugs, etc.

then rinse good w/water., then a good conductive ****.

Looks/works like new.....

 

[BronBronBronco]

FWIW.,I use lime-away & Q-tips to clean elect. connectors, female plugs, etc.

then rinse good w/water., then a good conductive ****.

Looks/works like new.....

Great idea!

Thanks.