ECU

[WileE7]

Where is the ECU for a 90 Bronco the Chiltons isn't very descriptive about its location and what does it look like

 

[miesk5]

Where is the ECU for a 90 Bronco the Chiltons isn't very descriptive about its location and what does it look like

yo Wile!

it is behind drivers side kick panel;

looks just like this;

EEC Identification. Bronco & Ford Source: by Ryan M

he has info on it that you will need at a yard

why are you replacing it?

 

[WileE7]

yo Wile!it is behind drivers side kick panel;

looks just like this;

EEC Identification. Bronco & Ford Source: by Ryan M

he has info on it that you will need at a yard

why are you replacing it?

i'm not replacing it i need to attach a computer module to it

 

[miesk5]

ok, what module? sounds interesting!

btw, here is a chip install article by Ryan Mmay help w/your project

 

[WileE7]

ok, what module? sounds interesting!btw, here is a chip install article by Ryan Mmay help w/your project

I got it from this site http://www.4wheelparts.com/manufacturer-pr...T&subCat=33

 

[WileE7]

ok, what module? sounds interesting!btw, here is a chip install article by Ryan Mmay help w/your project

I got it from this site http://www.4wheelparts.com/manufacturer-pr...T&subCat=33 thanks for the link

also i have installed new headers and the right side didn't have a gasket and i never had a leak since i installed the new headers i've gone through 3 gaskets getting blown out would i be able to install it with out a gasket?or should i take it to a shop to have it looked at?

 

[miesk5]

ok, JET has Install Instructions;

http://www.jetchip.com/howto.asp?folder=Fo...formanceModules

 

[miesk5]

headers; read what Brent did...using gaskets and Permatex Ultra Copper RTV silicone

http://www.bejara.com/fmsh.html

what type headers? look thru my site in EXHAUST -> Manifold for sim type Links