Dome light?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Justshootme84

Rest in Peace Friend! Never forgotten..
Moderator
Joined
Feb 20, 2004
Messages
4,209
Reaction score
11
Location
Palacios, TX
I want to remove my interior dome light to take out the headliner. What circuit is that so I can pull the fuse out? What other functions will I lose? Thanks, JSM84

 

Seabronc

New member
Joined
May 22, 2004
Messages
7,315
Reaction score
35
Location
North of NYC
The Dome lights get power from two places; the door jamb switches or thru the light switch, both supplied via fuse 8. Black with pink striped wire from light switch and black with light blue stripe from door jamb switches.

Good luck,

:)>-

 

Seabronc

New member
Joined
May 22, 2004
Messages
7,315
Reaction score
35
Location
North of NYC
I belive the door jamb pin swchs. are grounds, Usually the positive side is the same fuse as the cig. lighter.
19314[/snapback]

The pin switches are not grounds, they complete the 12 V circuit, see attached.

PG52.jpg

 
OP
OP
J

Justshootme84

Rest in Peace Friend! Never forgotten..
Moderator
Joined
Feb 20, 2004
Messages
4,209
Reaction score
11
Location
Palacios, TX
Thanks for that attached diagram photo SeaBronc, I knew you had something that could help out!!! I have a hard time reading my Haynes' manual on the circuitry, even with bifocals. Seems to me like pulling out the fuse is better than just taking out the bulb. Checking with the listing for fuse #8, only other item I'll lose is the clock?

I have no idea where the alarm is hooked to, but I can disable that with the ignition switch or key pad.

 

Members online

Forum statistics

Threads
22,662
Messages
136,894
Members
25,362
Latest member
Wihill
Top