Dana 44 Pinion Yoke Question

[brownbronco]

I have a 75 Bronco with a bad Pinion Yoke on the front. I need to find a yoke and replace it, but I have a couple of questions.

Where can I get the yoke. None of the parts guys list the yoke. Does anyone have the Spicer Number or Recomendations? Can I use one from a 75 Blazer (I got a complete front axle setup for the disc brakes -and the yoke is in good condition)?

When I replace the yoke, do I need a shim kit to reshim the Pinion - I see there are shims on the yoke side of the pinion?

Any other tips on changing the yoke will be appreciated.

Thanks for the help

 

[76Explorer]

Is this the one?

http://cgi.ebay.com/ebaymotors/Dana-44-pin...sspagenameZWDVW

 

[Broncoholics]

Slide the old yoke off, leave the shims and replace it with a new one. Don't forget to replace the seal while you're there. I usually go to a 4x4 junk yard and find a decent replacement for cheap, just match up the splines and outer diameter. Look for scratches on the side of a used yoke otherwise it will leak.