1994-95 5.0 WILL IT FIT

[TURK]

I JUST FOUND A NEWLY REBUILT 5.0 ROLLER CAM MOTOR THE GUY THINKS ITS A 1994 OR 1995 I HAVE A 1990 FULL SIZE BRONCO I KNOW TO CHANGE TO A ROLLER MOTOR YOU HAVE TO CHANGE INTAKE AND EXHAUST MANIFOLD BUT WILL A NEWER ONE FIT I MY OLD GIRL

THANKS TURK

 

[BLADE262US]

Being a roller motor has nothing to do with the intake or the exhaust manifolds . The roller part is the cam and lifters , And the 351W firing order . ( in some cases ) The reason you have to change the manifolds is that it will have a car intake on it which you could use in your truck if you had the correct plumbing for the air intake and the exhaust manifolds have to be changed because of the truck chassis vs the fox body car chassis ( clearance reasons ) So you can very easily put your intake and exhaust manifolds on it and put it in your truck but you also have to take into consideration that the car it came out of was more than likely mass air fuel injection and your truck is more than likely speed density fuel injection so you will have to check the cam specs to make sure your EEC wont freak out when you try running that cam profile . /emoticons/[email protected] 2x" width="20" height="20" />