1987 351H.O. MOTOR SPECS
- Thread starter K1HARRI
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Rons beast
Active member
- Joined
- Dec 13, 2007
- Messages
- 1,537
- Reaction score
- 14
Welcome K1:
Haynes manuals have the info you need.
Per my copy: 351-W and lightning- Main bearing oil clearance (standard)= no.1 bearing.......0.0001 to 0.0015 inch
all other bearings......0.0005 to 0.0015 inch
rod bearing oil clearance (standard)= 0.0008 to 0.0015 inch
rod bearing side clearance............0.010 to 0.020 inch
crankshaft end play.................0.004 to 0.008 inch
Hope this helps.
Good Luck
Haynes manuals have the info you need.
Per my copy: 351-W and lightning- Main bearing oil clearance (standard)= no.1 bearing.......0.0001 to 0.0015 inch
all other bearings......0.0005 to 0.0015 inch
rod bearing oil clearance (standard)= 0.0008 to 0.0015 inch
rod bearing side clearance............0.010 to 0.020 inch
crankshaft end play.................0.004 to 0.008 inch
Hope this helps.
Good Luck
