I'm taking the plunge this week and purchasing a 10-point cab cage for my '84 Bronco from S&W racecars, and Premium Highback seats from PRP (Premier Racing Products). The cab cage is pre-fabbed, pre-bent, all you need for about $220 plus $shipping. The PRP seats are highly rated on Pirate 4x4.com, about $180 each plus $shipping. I was originally going to get Mastercraft seats, but they are about $300 each +shpg. Photos of the install and a detailed write-up will follow.
10-point Cage & Seats
- Thread starter Justshootme84
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The FedEX man came by yesterday, delivered the S&W roll cage kit. Wohoo!!!
Looks very stout, pipes are thick.Total cost to my door was $330. Now to find a few dry days to get the welder out and get to work.
h34r: /emoticons/[email protected] 2x" width="20" height="20" />
Looks very stout, pipes are thick.Total cost to my door was $330. Now to find a few dry days to get the welder out and get to work.
h34r: /emoticons/[email protected] 2x" width="20" height="20" />cryptonik420
[SoP]BigSix4.9L
I think I may have to get this kit. Sounds like a good thing... It's always nice to have a lil more protection when out wheeling!
michiganbronco
New member
- Joined
- Jul 15, 2004
- Messages
- 2
- Reaction score
- 0
[SIZE=8pt]Wondering if they have the kit for my 94 bronco[/SIZE]
custom_78
New member
Do you have any pictures of the finished cage yet, Justshootme84? It's had to be long enough by now.
MB, the kit will fit 80-96 Broncos.
C78, not done yet, need another 2-3 weeks. I've had over 30 inches of rain since May, with daily storms, lighting, twisters, cats, dogs, etc. SO I've used the Bronco for work quite a bit lately. My neighbor's barn where I planned to do the welding was also recently torn up by the latest frog-strangler. It's a couple of weekends worth of work to cut and fit everything then get it thru the floor and welded to the frame. It's not exactly a simple bolt-in kit, some trimming is needed. I also had to put things on hold for the upcoming truck show next weekend. I didn't want to rip out the seats then put'em back in then rip'em out again, you know.
C78, not done yet, need another 2-3 weeks. I've had over 30 inches of rain since May, with daily storms, lighting, twisters, cats, dogs, etc. SO I've used the Bronco for work quite a bit lately. My neighbor's barn where I planned to do the welding was also recently torn up by the latest frog-strangler. It's a couple of weekends worth of work to cut and fit everything then get it thru the floor and welded to the frame. It's not exactly a simple bolt-in kit, some trimming is needed. I also had to put things on hold for the upcoming truck show next weekend. I didn't want to rip out the seats then put'em back in then rip'em out again, you know.
custom_78
New member
I understand how ling it takes to fit a cage together.
Desert Donk
New member
- Joined
- Jul 2, 2004
- Messages
- 78
- Reaction score
- 0
I went to the S&W web site and checked out the cage. Whoa. It certainly does look nice.
I finally got the seats from PRP. Took about 2 weeks to get'em. Looks like I'll have to get someone to install the cage and seats-too busy with other work. Stay tuned!!!
Broncoholics
Broncoholics
Whats PRP's web address for these seats?
S&W Racecars 10-point cage kit
I'm posting pics as I go along at the above link to my superford.org gallery. Man, is my interior a mess!!! I'm still pulling stuff out of the cab, and measuring everything before doing any cutting.
I'm posting pics as I go along at the above link to my superford.org gallery. Man, is my interior a mess!!! I'm still pulling stuff out of the cab, and measuring everything before doing any cutting.
I mounted the PRP seats to the factory seat brackets for the time being, so I can drive to a dry shelter. Posting pics at SFO tonight.
I made a little progress today, got some welding done. Had to detour thru some mudholes to and from the barn where I'm doing the work. Any comments or suggestions, advice or help are appreciated!!!
