MY New Project EB 76 Mexico

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
Hello guys I would like to share my new project.

EB 1976, 302.

In the future: 33s. 2" body lift, 4" superflex suspension, bedlock wheels.

All this upgrade will be homemade.

I will upload more picture of the progress.

Please let me know your comments and suggestions.

Perika0.JPG

 

Scott Andrews

New member
Joined
Nov 20, 2005
Messages
12
Reaction score
0
Looks like a fun project!

So haw far down will you take it before the rebuild?

S

 
OP
OP
Pericon

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
Here are some pictures of the progress.

New suspension, homemade. 4.5"

With the 33s.

DSC02734.JPG

DSC03019.JPG

DSC03132.JPG

DSC03133.JPG

DSC03134.JPG

DSC03142.JPG

 

Broncoholics

Broncoholics
Joined
Feb 24, 2004
Messages
1,301
Reaction score
4
Location
Washington State
Homemade 4.5" lift? Is that using spacers under the lower coil cup and blocks in the rear?

Good luck, sounds like fun!

I'd post photos of both my build ups I'm doing right now but never seem to get around to it.

Good work on the photo progress!

Plus both are looking rather ***** looking right now!
 

S_bolt19

Member
Joined
Oct 8, 2004
Messages
934
Reaction score
2
Location
Colorado
Looks like you have a lot to work with, I see you have power steering, hydro-boost & front disc brakes. That is a helluva starting point. That bracket on the front pass side of the engine block, looks like a mount for aftermarket A/C too.

Great vehicle to get!

 
OP
OP
Pericon

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
Broncoholic please place a link to see your work, I;ve been trying to see without succes.

 

Ivan MR

New member
Joined
May 23, 2006
Messages
9
Reaction score
0
here is another pic of this project...

we are working on this 76 bronco at my garage

bronco1.jpg

 

Ivan MR

New member
Joined
May 23, 2006
Messages
9
Reaction score
0
for the front we fabricated these spring stops.

the springs are longer than stock and somewhat stiffer, they are not attached at the top, so whenever pericon is ready he can go long arm.

we didn`t use blocks for the rear, instead we flipped the rear shackles like so:

brazul3.jpg

bronco5.jpg

 
Last edited by a moderator:
OP
OP
Pericon

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
perika.JPGHere is a picture on how is it going.

New adds

38.5 gumbo monster mudders

4.88 dif gears

12,000 lb warn winch

On board air system

 

Broncoholics

Broncoholics
Joined
Feb 24, 2004
Messages
1,301
Reaction score
4
Location
Washington State
heehee!! I've been keeping my Bronco locked away from cameras lately.

But I'll be doing some writeups here soon as I'm almost done.

Right now I have the HPD60 and D70 installed with the Cage 5.5" lift, Chromoly 35 spline axles, Ator drive flanges (instead of hubs), Trail Ready bead locks, New 38's, 1350 Drivelines, 3/8" diff covers, stone crusher steering, ram steering, stretched the wheel base 1" forwards and 4" back to a total gain of 98".

Right now I'm installing brake lines, filling in the rear wheel wells after cutting/pushing them back 4", gas tank relocation, tie cage to frame.

 
OP
OP
Pericon

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
Here is an update of my EB almost finish.

DSC03256.JPG

DSC03253.JPG

 
Last edited by a moderator:

S_bolt19

Member
Joined
Oct 8, 2004
Messages
934
Reaction score
2
Location
Colorado
Looks real nice! Couple of questions, #1 what type of seats are those, I like them and #2 did you build your own cage or buy it? But I really like the colors and the stripes just stand out. Looks great.

 
OP
OP
Pericon

Pericon

New member
Joined
May 10, 2006
Messages
32
Reaction score
0
Location
Mexico City
Those are the factory seats i just change the cover and add the head rest from another old car seats.

The I built my cage 8 points.

Thanks for the comments I upload some pictures in action.

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,628
Messages
136,755
Members
25,302
Latest member
RedAndGreyTruck
Top