3 Speed Column Rebuild

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

redfishtony

New member
Joined
May 15, 2009
Messages
26
Reaction score
0
Location
Thomasville, GA.
Doe anyone have reference or a link to any good instructions or videos about rebuilding a 3 speed column shifter. I got the new bushings and parts from Obsolete Ford parts in Nashville Ga but need some directions. Everyone says, "take your time, its not that hard" but to be honest I'm a bit intimidated by this project. No Youtube videos that I can find. Thanks for any advice. TW

 

Bully Bob

TOP GUN
Moderator
Joined
May 23, 2004
Messages
3,844
Reaction score
12
Location
Boulder City, Nevada (Las Vegas area)
Several of the EB parts catalogs have a "blow-up" pic of the column & all the parts in order.

While trying to move your steering wheel back-n-forth, up-n-down.., does it move, have play..?

If not, you only have to deal with the lower end of the column, under the hood.

However.., who knows what's going on down inside the main column tube.

The "rebuilt" ones aren't cheap but, probably worth it.

This is why I recommended installing the "floor-shifter".

Way better, well engineered & very dependable. Mine is prob. over 30 yrs. old & still works like new.

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,880
Members
25,108
Latest member
Utahstroke
Top