Looking for Internet store that sells 84 Bronco Fender trim that sits

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ftrfta1

New member
Joined
Sep 1, 2016
Messages
9
Reaction score
1
Like topic states I am looking for a company or even a company that may sell used parts that has the fender trim for sale that sits above the wheel opening and not in the wheel opening for my 84 Bronco. It is the last piece I need and my Bronco is mostly Restored and ready to be driven. I am looking for the passenger rear but if they sell the whole set that would be great too. I did put post similar in classified area but figured if I put here when someone else needs to find same trim this section would be easier to read about it if someone knows where this trim could be bought. Even if someone had the original part # or #'s that would be a big help too.. I am sorry to bug everybody with my post but I have just had a hard time finding exterior trim for this Bronco. Took me a year to find a piece of the lower side drivers flat black insert into chrome moulding in front of the rear quater. I know next time I will be restoring a 78 or 79 since parts are way easier to find since more popularity out there so more aftermarket parts available and cheaper. This bronco was in such good shape rust wise I had to do it though. Will be well worth it once I get the trim and I am driving it though :) /emoticons/[email protected] 2x" width="20" height="20" />

 

johnnyreb

Well-known member
Joined
Feb 23, 2021
Messages
2,428
Reaction score
1,071
Location
West Virginia
Like topic states I am looking for a company or even a company that may sell used parts that has the fender trim for sale that sits above the wheel opening and not in the wheel opening for my 84 Bronco. It is the last piece I need and my Bronco is mostly Restored and ready to be driven. I am looking for the passenger rear but if they sell the whole set that would be great too. I did put post similar in classified area but figured if I put here when someone else needs to find same trim this section would be easier to read about it if someone knows where this trim could be bought. Even if someone had the original part # or #'s that would be a big help too.. I am sorry to bug everybody with my post but I have just had a hard time finding exterior trim for this Bronco. Took me a year to find a piece of the lower side drivers flat black insert into chrome moulding in front of the rear quater. I know next time I will be restoring a 78 or 79 since parts are way easier to find since more popularity out there so more aftermarket parts available and cheaper. This bronco was in such good shape rust wise I had to do it though. Will be well worth it once I get the trim and I am driving it though :) /emoticons/[email protected] 2x" width="20" height="20" />
Sunscribe to Old Cars ,check Hemmings. Alot of the old car magazines has old junk yards in them. Also type it in your address bar. I found a old chevy fender today in the mag. In Ok. Price was very reasonable too.
 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
9,071
Reaction score
1,019
Location
Floating in the Pacific
Yo Ftrfta1,
Here is what I have found for your 84;
Tabco is said to have factory direct fit and same gauge replacement panels as original
https://tabcoparts.com/amfinder/

Dennis Carpenter has nothing close.
I bought our 96 Bronco's 1/4 panel patch panels from MILL SUPPLY, Cleveland, OH
They were primed and of 18 gauge steel - exact fit around wheel well arch and packaged very well for shipping.
I ordered it on 6 JUN 2011 @ 1225 hours and received on 8 JUN 2011 !!!
S & H cost for both from Cleveland, OH to NJ was $12.xx

Their 84 Bronco 1/4 panel parts On-line Store site is https://www.millsupply.com/auto-bod.../bronco/1984/wheel-arches-and-quarter-panels/
Screenshot_20210829-074636_Chrome.jpg
 

johnnyreb

Well-known member
Joined
Feb 23, 2021
Messages
2,428
Reaction score
1,071
Location
West Virginia
Like topic states I am looking for a company or even a company that may sell used parts that has the fender trim for sale that sits above the wheel opening and not in the wheel opening for my 84 Bronco. It is the last piece I need and my Bronco is mostly Restored and ready to be driven. I am looking for the passenger rear but if they sell the whole set that would be great too. I did put post similar in classified area but figured if I put here when someone else needs to find same trim this section would be easier to read about it if someone knows where this trim could be bought. Even if someone had the original part # or #'s that would be a big help too.. I am sorry to bug everybody with my post but I have just had a hard time finding exterior trim for this Bronco. Took me a year to find a piece of the lower side drivers flat black insert into chrome moulding in front of the rear quater. I know next time I will be restoring a 78 or 79 since parts are way easier to find since more popularity out there so more aftermarket parts available and cheaper. This bronco was in such good shape rust wise I had to do it though. Will be well worth it once I get the trim and I am driving it though :) /emoticons/[email protected] 2x" width="20" height="20" />
Check out or call Green Sales Company in Ohio at 800-543-4959. I ordered a reverse sending unit for the back up lights on my 78 Bronco -Wednesday and got it yesterday-(Saturday) made by Ford in the USA. Check out their videos too. They have a huge warehouse(s) just right outside of Cincinattie. I called them up and the phone rang 1 time. Nice courtesy polite people. Give them a call--they have everything you can think of -Made by Ford in the USA.
 

Members online

No members online now.

Forum statistics

Threads
22,520
Messages
135,977
Members
25,124
Latest member
Fryman22
Top