Jump to content


Photo

Wtb 80-86 Fender Trim. Trim that is above the rear well not in it.


6 replies to this topic

#1 Ftrfta1

Ftrfta1

    Where's My Hammer!?!

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Favorite Bronco Year?:1978

Posted 20 July 2017 - 12:45 AM

Like ad states I am looking for fender trim for my bronco. It is a 84 and now 99.9% done but my passenger rear side fender trim is in terrible condition. My fender trim is the style that sits on the fender a few inches above the wheel opening and not in the wheel opening. It connects to the lower side moulding etc.. If anyone has this piece of trim or even a whole set I would be interested in buying it. If anyone knows where they sell this trim that would be awesome too. I bought a set off ebay and sent the seller a message asking if it was the trim that is a few inches above the wheel opening and not the trim that sits in the wheel opening and I got 0 response. I then asked to cancel the order and got 0 response. So wrote an email to the seller and told him that if it is the right trim then go along with the sale. It has now neen like 13 days no response but I did see in shipping area it shows 10 business days to ship out. So tomorrow (friday) is 10th business day. Even though this trim may or may not ship out or not I am still looking because I dont think the seller even cares if it is what I asked him and he is going to ship it out no matter what because it is a sale to him. He just figures if he ignores me all is well. I am a seller on ebay and I would never ignore anyone if they asked a question. Its crazy.. So like I said I think he is selling the same wheel opening trim everyone else is so I am looking for the right trim. This is the last thing I need to complete my restored Bronco so I would be very gratefull if someone has one or set to sell or point me in the right direction. Thank You fellow Bronco Peeps ! Blayne
84 Bronco

#2 Ftrfta1

Ftrfta1

    Where's My Hammer!?!

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Favorite Bronco Year?:1978

Posted 29 July 2017 - 10:15 PM

The part # I am looking for is "eotz-9929038-a" I copied a pic to show what it looks like. I just need the one on the passenger side. (Pic shows drivers) Need this piece to finish my bronco so I am willing to pay $100 for it used as long as it is in good shape. When in stock at Dennis Carpenter it is $85 new. Just would like to finish my bronco so I can drive it. I know I can drive it without it, but when you restore a truck , you can't just have it not done..Thank You, Blayne
84 Bronco

#3 Ftrfta1

Ftrfta1

    Where's My Hammer!?!

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Favorite Bronco Year?:1978

Posted 29 July 2017 - 10:16 PM

Pic

Edited by Ftrfta1, 29 July 2017 - 10:17 PM.

84 Bronco

#4 miesk5

miesk5

    Al

  • Moderators
  • PipPipPipPipPipPipPipPip
  • 7274 posts
  • Gender:Male
  • Location:NJ Pinelands; near a neat overpass
  • Favorite Bronco Year?:1996

Posted 30 July 2017 - 04:46 AM

Yo,

I tried a few places for you to no avail.

for obsolete parts by Ford long version pn:
http://www.partsvoice.com/
http://www.rearcounter.com
http://www.greensalescompany.com

...

And some Bronco fender trim suppliers such as:

 

Precision® Replacement Parts (prp.com) - clips, Mouldings & weather strip

Cowles - StyleGuard & Protekto trim & Moulding & trim

 

http://willmore.com - Bronco/Ford truck rocker panel guards, gas tank stainless steel covers, body side moulding 

 

http://www.trim-gard.com - Ford truck body side Mouldings: 80-86 (black/chrome, 1.875 in x 20 ft ); 87-91 black/chrome, 2.875 in x 26 ft & 2.875 in x 50 ft) (View Color Chart) & universal wheel well mouldings, door edge guard protectors, step tread mouldings, wheel well & door edge moulding.

GL!

96 XL 5.0 E4OD, Manual BW 1356, manual hubs. See my partially recovered Bronco site. I need to clean up dead links & add many more. Thanks you Mr, Schwim! http://schwimserver5.com/?index=1128
THANKS to ALL WHO SERVE!

#5 miesk5

miesk5

    Al

  • Moderators
  • PipPipPipPipPipPipPipPip
  • 7274 posts
  • Gender:Male
  • Location:NJ Pinelands; near a neat overpass
  • Favorite Bronco Year?:1996

Posted 30 July 2017 - 04:50 AM

Yo,

One more, call:

John Crone -owner
Peerless Auto Parts 
3541 Artesia Boulevard, 
Torrance, CA 90504 
(310) 856-4810 ‎ 


96 XL 5.0 E4OD, Manual BW 1356, manual hubs. See my partially recovered Bronco site. I need to clean up dead links & add many more. Thanks you Mr, Schwim! http://schwimserver5.com/?index=1128
THANKS to ALL WHO SERVE!

#6 Ftrfta1

Ftrfta1

    Where's My Hammer!?!

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Favorite Bronco Year?:1978

Posted 31 July 2017 - 04:32 AM

Thank You for the reply and info/links.. I tried everywhere I could find on the net. I talked to mustang service center on friday because rearcounter showed they had one.. he said on phone he did but called me later after getting it out of the warehouse and it ended up being wrong trim. I was so excited for about the 2 hours until he called saying it wasn't right part. Ebayer I purchased from after waiting 20 days ended up refunding my $ stating that one or 2 months till in stock. After taking my $ for 2 weeks and his ad is still up. So basically uses your $ as a loan knowing he dont have anything to sell. Also doesnt respond at all those 20 days.. if someone is buying trim on ebay make sure you look at feedback. I left him nuetral feedback explaining 20 days no communication and no trim. Kind of happy he was a deadbeat because it looks like his ad was wrong for the trim and I would of received the wheel well trim instead of the right trim. I am hoping someone has extra trim laying around. Thinking its the only way I will get to buy it.. Thank You, Blayne
84 Bronco

#7 miesk5

miesk5

    Al

  • Moderators
  • PipPipPipPipPipPipPipPip
  • 7274 posts
  • Gender:Male
  • Location:NJ Pinelands; near a neat overpass
  • Favorite Bronco Year?:1996

Posted 31 July 2017 - 11:47 AM

Yo Blayne,

yw.

Hopefully, it will be  available again soon.

Many Bronco parts are unavailable now.  

The cash for clunkers really has an impact.

GL!

Al


96 XL 5.0 E4OD, Manual BW 1356, manual hubs. See my partially recovered Bronco site. I need to clean up dead links & add many more. Thanks you Mr, Schwim! http://schwimserver5.com/?index=1128
THANKS to ALL WHO SERVE!



Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users