Have a 95 bronco, the rear window works only if you go to the back and put a key in and twist and then it will go up. On the dash in the front, the rear window button does not work. What should I do in order to get it working again
95 bronco rear window button
- Thread starter 12cmartin
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Seabronc
New member
Welcome to the Zone !!
There are 2 fuses, one for the front button and one for the rear tailgate switch, fuse 14 and fuse 12 in the fuse panel. Attached is a diagram of the circuit.
Probably the fuse or the button itself, if the door windows work it is most likely the button that needs to be replaced.
>-
There are 2 fuses, one for the front button and one for the rear tailgate switch, fuse 14 and fuse 12 in the fuse panel. Attached is a diagram of the circuit.
Probably the fuse or the button itself, if the door windows work it is most likely the button that needs to be replaced.
>-
Last edited by a moderator:
therooster
New member
im having the same issue i think? I checked the fuse in the 12 spot and i have power there but not at the switch?
Seabronc
New member
Fuse 14 is needed for the front switch to operate the window. Check the diagram above.
>-
>-Similar threads
Members online
No members online now.
Latest posts
-
-
New Replacement Catalytic Converter check engine light on.
- Latest: jimbronco91
-
-
-