YUmaDune
New member
There is an old post on this from 2009 but I believe my problem is different. I can get the SpeedO to work with a drill all the way back at the Transfer Case. The Driven Plastic Gear is new and I drive the SpeedO with this in the drill. Reaching in the Drive Gear felt lose. I pulled the drive line and the nut on the ****** was lose. I torqued this to spec and the drive gear does not move but the SpeedO still does not work. If my memory serves me the Drive Gear is brass and it feels cupped in the center. With the Driven Gear being plastic I would not have thought the Drive Gear would wear but who knows how many miles on the unit? Can I fish the Drive gear out the back with the ****** and Seal removed? Hope fully??